Fibaro Z-Wave in-wall Roller Shutter Controller
New version available now - Roller Shutter 2! Fibaro Blind/Roller Shutter is used to control electric motors in blinds, roller shutters, canopies, awnings and curtains. It can even detect position of the blinds for full flexibility in z-wave control.
Fibaro Z-Wave Roller Shutter Controller
The fibaro Z-Wave module has a unique feature of monitoring current Roller/Blind position. It enable Z-Wave command to control (open / close) for shutters, blinds, curtains, etc using your existing switches. Works with 240V motors.
♦ Z-Wave “Three Wires” tubular motor controller can control AC motors.
♦ Fully configurable via Z-Wave settings
♦ Power of connected motor up to 1KW
♦ Z-Wave RF frequency 921.42MHz (Aus/NZ)
♦ Wide range compatibility with existing tubular motors
♦ Function of detecting the current state of a controlled device, e.g. position of roller shutter
Note: Roller shutter controller only. Motor not included
Integrates with all certified Z-Wave controllers in Australian frequency (921.42MHz)
Technical Specifications
|
Description
|
|
|
RF Protocol
|
Z-Wave (Multilevel Command Class)
|
|
Z-wave device type
|
Z-wave binary switch, routing slave
|
|
Operating Voltage
|
AC 230V / 50Hz
|
|
Max Loading
|
1KW circuit
|
|
RF Frequency
|
921.42Mhz - AU/NZ approved RF for Z-wave
|
|
Operation Range
|
Up to 30m when no obstacles
|
|
Application
|
Indoor use only
|
|
Housing
|
ABS
|
|
Dimensions
|
(L x W x H) 42mm x 36mm x 15mm
|
| Repeats z-wave signals | Yes |
|---|---|
| DIY | No |
| Electrican Required | Yes |
| Neutral wire requirement | No |
